Lift & Rotate Turntable. Dual H-Style Lift And Rotate Turntable comes complete with an 84.0” Wide (BF) by 10’-0” Long Powered Roller Conveyor.

Description

This Turntable includes an 84” Wide by 10’-0” Long powered conveyor section.   It is self-contained and comes pre-wired with all sensors and actuators.  The turntable pneumatically raises 3” and has powered rotation in either direction in increments of 90 degrees.  The conveyor is powered by a drive unit that drives two separate 15” wide belts, one on either side of the turntable for positive conveyor drive.  The Turntable is guided up and down by 16 cam rollers to insure level lifting.

Specifications:

• The Turntable bolts into the Self-Contained Conveyor.
• 12” Top of Roller (TOR) conveyor height with 2-1/2” load carrying rollers on 3” centers.
• 1.0hp conveyor drive motor at 60fpm with safety lockout switch.
• Five inch structural channel side frames (C5).
• Two 15” wide drive belts on two pressure rack assemblies.
• 60” Dual H-Style Lift & Rotate bars.
• 1/2hp, 460 Volt, turntable drive motor with VFD.
• 3,000lb lift & rotate capacity.
• Bi-directional continuous motion in 90 deg. increments.